Normaco Measuring Arc
V Groove Measuring kit
November 11, 2019
Portable Drill
October 28, 2019

3-Axis Light Portable Milling Machine

Normaco Light Milling Machine is portable and pneumatically powered 3-axis milling machine.

  • Used for on-site milling work such as weld removal
  • Extremely light weight and easily portable
  • Pneumatic motor for working in areas where ignition sources are not allowed.

The Portable Milling Machine is mounted directly to the work piece by bolting, welding or using a magnet base. It can also be secured with vacuum pads that allow the mounting to an non-ferrous material and without damaging the mounting area.

The Portable Milling Machine is easily separated into portable sized parts each weighing under 30 kg and thus it can be easily carried to the job site. Dismantling and re-assembly takes only few minutes.

The Machine has a light weight aluminium construction and it is equipped with high quality linear guideways and ball screws.

The Portable Milling Machine is powered by high quality air motors. X-axis is driven by an air motor or manually with a handwheel. The spindle has powerful 3kw air motor.

Normaco portable milling machine

Technical Data of the Standard Machine

Travel

X-travel: 1020 mm

Y-travel: 225 mm

Z-travel: 80mm

Feed

X-axis: pneumatic 0.7kW & manual

Y-axis: manual

Z-axis: manual

Spindle

Ratio: 1:1

Motor: Pneumatic 3kW

Depth measurement with digital read-out

Spindle BT30

Cooling

Tooling

Face mill max diameter 50 mm

End mill max diameter 20mm
Mounting Welded or bolted base
Optional; Magnet base 300kg / 600kg magnet
Machine delivery includes Control unit
Transport box
Set of hand tools for operating the machine
CE certification and manual
Weights

Operational weight: 75 kg

X-axis assembly: 30 kg

Y-axis assembly: 20 kg

Z-Axis assembly: 25 kg

  Transport weight: 180 kg

Normaco Portable Milling machine

The spindle can be rotated +/- 45 degrees

Normaco Portable Milling Machine Transport box

Milling machine is delivered in durable transport&storage box


Control Unit

Dimensions

360 x 480 x 172mm

Weight

12 kg

Functions

Feed control up / down / stop

Spindle start/stop

Feed speed control

Manometer

Prevention of accidental start-up
Emergency stop
Control Unit

The control unit is used to control the Portable Milling machine. It is comfortable to use the milling machine from the control unit. The unit also has safety functionality such as prevention of accidental start-up and emergency stop to keep the operator safe.
The machine must be used with a filter/lubricator such as Normaco Air Treatment set.


Re-assembly in 3-steps in 3 minutes!